7 Meter Octagonal Pole with Arm and Foundation set

Product Description

7 Meter Octagonal Pole - Technical Data Sheet

General Specifications:

• Type: Octagonal Street Lighting Pole
• Height: 7 meters
• Material: Galvanized steel
• Shape: Tapered Octagonal
• Surface Finish: Hot-dip galvanized (75-100 microns) and optional powder coating/painting for added corrosion resistance
• Usage: Street lighting, pathway lighting, and small-area lighting

Structural Specifications:

• Base Diameter: Approximately 155 mm (varies based on manufacturer)
• Top Diameter: Approximately 70 mm (varies based on manufacturer)
• Wall Thickness: Typically 3-5 mm (customizable based on load requirements)
• Pole Taper Rate: 11-13% taper
• Design Load: Wind load based on local standards (e.g., IS 875 Part 3 for India, EN 40 for Europe)
• Mounting Height: 7 meters from base plate to top

Base Plate Specifications:

• Shape: Square/Rectangular (customizable)
• Dimensions: 300 mm x 300 mm x 20 mm (dimensions may vary)
• Anchor Bolt Hole Diameter: 18-24 mm (for M16 or M20 bolts)
• Bolt Circle Diameter: 220-250 mm
• Base Plate Material: Galvanized steel

Mounting Details:

• Anchor Bolt Type: L-type or J-type bolts (steel or galvanized steel)
• Installation: Installed on a concrete foundation, anchor bolts embedded in concrete

Accessories:

• Pole Cap: Provided to prevent water ingress
• Service Door: Lockable access door for wiring and maintenance
• Cable Entry Hole: Located near the base of the pole for power cables
• Bracket Arm (Optional): Single or double arm bracket for lighting fixtures, standard 1.5 meters long

Coating and Protection:

• Galvanization: Hot-dip galvanized as per ISO 1461
• Optional Powder Coating: Customized color options available
• Corrosion Resistance: Designed for outdoor use with protection against corrosion, humidity, and UV rays

Compliance Standards:

• Wind Load: Designed as per relevant local standards
• Material Standards: As per ISO
• Galvanization Standards: ISO 1461
• Quality Standards: ISO 9001 Certified Manufacturing Process

Weight and Packaging:

• Approximate Pole Weight: 70-100 kg (may vary depending on wall thickness and specific dimensions)
• Packaging: Poles are typically packed with protective wrapping